E.V CAR CHARGING LEADS & SPARES
Juice Booster 2 | 22kW 3Phase Mobile Compact Wall Box | CEE RED
Juice Booster 2 | 22kW 3Phase Mobile Compact Wall Box | CEE RED
Couldn't load pickup availability
Juice Booster 2 UK Basic Set for ON THE GO or as a COMPACT WALL BOX , charging at Home and in the Workplace, ideal solution for Rental Properties and Listed Buildings, you have every situation covered and have maximum flexibility, No need for a FIXED WALL BOX
Whats in your Case? 
- Juice Booster 2 Mobile Wall Box
- Type 2 32A 3Phase Female Vehicle Plug with 5m cable
- 32A CEE Red Power Adaptor & 13A UK Power Adaptor
- Carry Case
- 3 Years Warranty
- Optional Locking Wall Bracket
Product details
Housing Diamensions: Length: 280mm, Diameter: 70mm
Weight : 1.0kg excluding cables, 3.2kg with cables and plugs
Power : 1.4kw - 22kw AC
Rated Current : 6A to 32A
Mains Voltage : 230V (Single Phase) / 400V (3Phase)
Residual Current Device : RCD DC 6mA, AC/DC 30mA with protective conductor monitoring
Protection Class : I
IP protection rating : IP67 (Protects against damaging quantities of dust and immersion in water for short periods)
Vehicle-end connector : Type 2 (EN 62196) Cable length 5m
Mains-end plug : Over 30 self-detecting adapters are available for domestic, industrial and EV sockets, 1.4m power cable + approx 30cm adapter
Total Cable Length : Approx 5m
Temperature Range : Storage: -30°C to + 60°C Operation: -30°C to + 50°C
Operating elecvation limit : Up to 3,000m above sea level
Impact and drop proof : Able to withstand a wheel load of 2000kg should you drive over it by mistake (the rubber casing may burst, and the housing and polug may be scratched or bent, but live components will not be exposed) Drop proof from heights up to 100cm
Colour : Metallic anthracite, black rubber caps and cables
Material : Anodised aluminium with rubber caps
Standards : IEC 62752, IEC 62196, 61851-Mode 2, 61851 - Mode 3 (with Type 2 and Type 3c adapters) EMC, RoHS
JB2 Automatic Adaptor Recognition
The Juice Connector with automatic adapter recognition is the proprietary interface for all Juice adapter plugs and extension cables. The Connecting parts are coded and therefore protected against polarity reversal.
The Juice Connector has leading contacts to the earth conductor and CP (Control Pilot connection for the transmission of control signals between the electric vehicle and the charging station) this gives maximum application safety. The Plug-In connection is designed in such a way that it can also cover future functions
Product care
Ensure your charge cable is protected against water and damp to ensure the long life of your cable.
Ensure that your charging cable is not twisted or excessively tightly bent during cable storage.
Always store the cable in a dry, clean place. Plug to plug cables should be removed from the charge unit when not in use. This will also protect the charge unit from damp and dust.
Dust caps should always be replaced when cable is not in use.
It is advisable to periodically clean the plug pins with a dry, clean cloth. This will remove any damp or dust particles which will cause damage.
DO NOT drive over your cable or plugs or continually drop the plugs.
We recommend your charge your vehicle in the following sequence:
- Charge Station.
- First Plug the Male Charger Plug into the Charge Station then Female Plug into your Vehicle.
- When finished Charging disconnect the Vehicle Plug first, then the Charger Station Plug.
